Видео

Ok😊

Drizzle a little alcohol on the hot glue… dis-bonds immediately.

Very nice Comparison video

Good basic video ..can I offer some suggestions ? If you rolled some strips of panel steel to go across the under side from side to side at the steel only stage , with an over lap of 3 inches both sides , and tacked them in place with your mig you would get a plug which resisted twisting .It also gives a rigid accurate trim . edge . I prime my plugs ( dye ) with a Duratec primer or regular 2 pk automotive primer . Any divets can be stop puttied with Dynatron or similar wet sand finished and buffed before the wax parting agent ( around 5/6 ) polished and left an hour after polishing between wax coats . Then pva before the tooling gel ..It will give you a mould which will need much less wet sanding to get ready to mould from ..👍 otherwise good info ..

8:20 ever think thats because the arkerman is complete shit?🤣 complete shit steering (under power) AND complete shit akerman? nah cant be related

3:36 wait why is it exaggerated? your tierod pivots on the lines you talk about at 2:54

you are a suspension master mate!

You can actually take that plastic cover off and then pull the pin out from the bottom side

Man, you got me thinking about the steering setup on my toyota pickup. Its forward steer and im sure its just as bad as the demo on paper lol. I think im gonna try to make it rear steer and get better geometry. This might be the reason why my tires need rotation more often than i think they should is because they are scrubbing the heck out of the roads every turn i take lol... Thanks for the great explanation man 👍👌

😂I love your dog!

hello, in which program do you make such drawings, thank you for the answer and luck in everything!

Hello Doug You helped me a lot , thanks to your videos I decided to do the wiring myself , my project is a 1/4 mile drag car , so I did the wiring and at Dino keep cutting off around 460 whp , my tunner said wiring problem on shielded wiring on crank , knock and cam sensors , he said it’s wrong so I need to have a visual sample how you did it if no much to ask

Great job on details of mold building. Excellent work. Hope to use your technique on custom RV10 instrument panel and center console.

If the limiting factor on this setup is where the heim joint touches the mounting bracket for the steering would it have been possible to add longer spaces either side of the heim and space the brackets out abit more so that the heim doesn't touch? Or would that cause other issues?

gracias amigo

Did you sell it ?

Great work and engineering. I'll do this to my buggy. One procedure I will change is before spot welding the caliper bracket to the spindle, Put the pads in the caliper and slip it in place over the rotor. Attach a regulated air line to the brake line port. induce to 10 psi air into caliper and if it's set in place correctly spot weld it. I did this before on a car and it worked great.

Beautiful work man I learned a lot from this, I don't know anything about fiberglass but I'm interested for making hard toe caps for protective work boots

1st video i chose to watch to learn how to do this and I don't need to watch anyone else's. Great stuff. Thank you

offroad Driving Tip: Keep your thumbs outside the rim of the steering wheel, to prevent them from being broken, if you land heavily or hit a big ditch.

Thank you Man.. been working on this for years... but You were worth the wait.. buddy🎉🎉

Crush lock nuts.

After watching your vids I pulled the trigger and got the bend tech pro. Thanks for the amazing content

mesin ini apakah sama dengan mesin captiva 2.4L ecotec

😍😍😍👏👏👏👏💯💯💯💪💪💪👍👍

Mentally bonding with the car and learning what its limits are is priceless. I can’t imagine what the folks go through in the Baja 1000 races.

Sorry sir I couldn't get the downloaded files for this project

You've done Great on your Ride,...,whats next? .A Race?

You know Mike I've followed your project from the start, and gotta say i am so impressed that you can follow it all the way through and enjoy it. Congratulations.

Your car just launches and lands so so smooth , Makes me want to tear my car apart and do what you have done. Did you design your suspension yourself ?? . I don't recall if your first car had the same designed suspension. I believe you shared your design if I remember correctly . Have you had any cracking issues ??. I know if I launched my car like you do , I would be breaking arms and cracking the frame. Love that car you have.

Nice footage Mike! It's watching a video game. The buggy looks like its dialed-in.

Offroad Bug, Dftly looks n sounds like a Great time n lovin the color/set up combo. Well done my friend. 👍🏻😎👍🏻

Those are some good sized jumps. Looks like it’s sucking them up with ease.

epic drone shot bruh!!

Dude.... I wanna run this track. This looks sick!!!

So nice! Beautiful work Mike!

work perfect ,congrats boy 👍👏👏💯💯

G'day, Wratchet looks very well balanced when taking those jumps. Q. How's the spine after a session on the track. So thanks for sharing your track time it's always amazing to watch. ✌️ Peace from Melbourne Australia.

Top de mais

Looking to see how those seats are mounted. They look like there bolted straight to the cage. Maybe you could give them their own shock absorbers to save on spine work later. (since you said the landings where a little jarring).

The car works good! great build.

Super fun

That looks like Fun. How far, how high can that thing jump?

Music is too loud.

kidney belt might help. they work. 👍

What seat are you using and are they working. Thanks great video!!

Nice!

Nice Job! Your camera work and editing worked great! The car seems to be running great.

very cool, everything seems to be flowing perfectly 💯💯💪💪👍👍👏👏

I'm not sure why you didn't add brakes before you put the wheels on to begin with. Also, on a trailer like this both axles should have brakes.